Kenmore 600 3.5 cu. ft. Top Load 110-2962 Washer "washer drain pump wiring" Questions

Ad

Question about Kenmore Washing Machines

1 Answer

...washer does drain normally, then you could have a failed pressure switch, air pressure hose problem, wiring failure or a failed control board. I provided some technical information below that will ...

Ad

Question about Kenmore Washing Machines

1 Answer

...the pump, then you could have a clog in this area. If the washer does drain normally, then you could have a failed pressure switch, air pressure hose problem, wiring failure or a failed control

Ad

washer to drain&spin and start. if you have 120 volts replace the drain pump. if you have no voltage replace main control. go to this guidance and location of parts.      http://www

Question about Kenmore Washing Machines

1 Answer

...pump motor. 5. Check that the drain hose and drain pump filter are clear of foreign objects. 6. Plug in washer or reconnect power. 7. Verify CCU operation by running a Diagnostic Test or any

Question about Kenmore Washing Machines

1 Answer

washer does not drain the water, it is a front load washer. I have checked the pump already. Noises - the original pump was a 40 watt pump, it often made a "howling" like noise. Replace the pump...the

Question about Whirlpool Washing Machines

1 Answer

washer drain as much as it will, remove clothing, and turn the washer over onto its front side. Remove the bottom cover (if present), and follow the drain line back to the pump assembly. If you have a

Question about Kenmore Washing Machines

1 Answer

washer won't drain! The OE message was on, I My washer won't drain! The OE message was on, I cleaned the filter, re ran the load and it still won't drain. have you cleaned out the water pump and hose

...drain pump with out having to fill the drum/washer with water? I have cleared out the filter, remove the pump it it looks clean. Nothing around propeller. I remove drum drain hose, it's clear.I think ...

Question about Kenmore Washing Machines

1 Answer

drain pump from the washer. - Check that the impeller is not detached from the motor shaft. If the impeller is detached from the shaft, is broken or has any scratches, the drain pump must be replaced.

Question about Whirlpool Washing Machines

2 Answers

...washer and drain out any water in the unit. Remove the clothing and pull the washer out so that you can reach the access panel. Take a look at the wiring between the drain pump and the CCU (control ...

Not finding what you are looking for?
Washing Machines Logo

42 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...