2003 Mazda 323 "lock key" Questions

...323 BA immobiliser problem. You get out of car close door then lock it using key, then unlock it with key. Now lock it with key again. Open with remote and all should be right to start it as

...lock/unlock with key in keyhole in door, but not with fob, and other doors would not lock/unlock. Even once inside none of the doors would lock/unlock with lock switch, or even by pulling handles. ...

5 seconds, then hold the unlock button down and press the lock button 3 times within 10 seconds and release both buttons. The doors should lock/unlock to give you confirmation and your key should work

...the middle of the key and press the 'unlock' button 3 times, then let go. Quickly repeat the lock and unlock button sequence on the spare key. All doors should lock and then unlock when it has

...key, it is not supposed to unlock the driver's door. The power lock system will only work from the driver's side. It is supposed to lock you in...that is the way it is designed. Check your owner's ...

Hi i locked my bmw 323i with key pad now it wont Hi i locked my bmw 323i with key pad now it wont unlock with key pad if i do it with the key the alarm keeps going off what do i do ? the BMW is ...

...lock function on the key, the inside of the car and the door handles are all not working. Any ideas? check the door lock switchs first to make sure their is power going to it then check the lock ...

...to be tested and came back good. checked starter, battery, fuses. Could it be the engine is locked up? Try turning crank with socket wrench each way a little to see if locked. If so, remove ...

i.ve lost the keys to my car. what's the easiest way to hotwire the car? i.ve lost the keys to my car. what's the easiest way to hotwire the car? call a lock smith

...key unlock drivers door but not the other three doors If the door lock master switch is on the driver's door panel, most common issue is either a bad switch, or broken wiring in the door hinge area ...