...motor which rotates inside along with the hard discs and the spindle might have got loosened If this is in warranty then get it replaced , other wise you might need a new one I also dropped mine some ...
motor blew, you WILL hose the new board, and end up with 2 bad drives IF the PCB blew, it might just surprise you and work. I have used this trick to recover data for $$$ on 8,20,60,80,160,200,and 250
...motor failure, jammed platter. If you hear it clicking or clunking then it is likely to be a stuck head or actuator. If so sometimes you can give the drive a sharp **** to and fro to try and spin the ...
...sometimes it would come up, other times not. When it does come up in My Computer it doesnt have a name anymore, just a drive letter. When I click on it all the files that were there are now gone. The ...
Question about LaCie Computers & Internet
...motor), or logic board problem. Note: this is not jumper settings or PSU problem. When jumper settings are incorrect (PATA) the hard disk is not detected by BIOS, or sometimes not detected by USB ...
...motor. So.... I opened the case only to find the drive moved forward because the mounts failed. Result the SATA connection was not connected...no power! I found both, and only, plastic supports to ...
Question about Iomega Computers & Internet
...sometimes after a fall or abnormal termination they fail to return to their regular parking position and are left on the surface. Immediately after the motor stops spinning they stick to the ideally ...
Question about Computers & Internet
...work, because there is adaptive data that is stored on the controller that must be maintained with the original drive. The other problem, and it's something we see often in these drives, if there was ...
3 questions posted
Usually answered in minutes!
261 Questions
83 Questions
84 Questions
44 Questions
49 Questions