Vision Fitness 2011 Vision T9800 Hrt Treadmill "moving smooth" Questions

Ad

Question about Smoothfitness Exercise & Fitness

1 Answer

...runs okay when I am not standing on it. As soon as I stand on the it, the treadmill is not moving, while the belt keeps on moving. you may have to adjust tension notch at a time and see if

Ad

Wiring diagram need for an Smoothfitness EVO treadmill. I need the service manual and/or wiring diagrams for an EVO Smooth FX40HR treadmill. During a move I disconnected some of the factory wiring ...

Ad

Question about Exercise & Fitness

1 Answer

...on treadmill its sticking not smooth like it used to be and noisy Hi, You need to do some lubrication on moving parts such as bearings, motor (use a light oil). Some disassemble is required. Good ...

I have a 5.op Smooth folding treadmill that I bought in 2002 and has worked perfectly until now. the walking belt has frayed on the right side and now has a cut in it. I've tried to readjust the I

Question about Bowflex Exercise & Fitness

1 Answer

...moving but the monitor is trying to calibrate. The motor must move the drive pulley for calibration to pass. remove rear covers and check drive belt. you should hear the lwr board relay click to ...

healthrider 15.5 won't run,motor makes alittle grunt,turns alittle but won't run,incline motor works healthrider 15.5 won't run,incline works fine,console lights up,beeps when buttons pushed,belt ...

smooth fitness treadmill display after pushing the start button appears to be locked into the words S I 2 for sports interval which is number 2 on the menu and I do not know how to reprogram or reboot

Question about Smoothfitness Exercise & Fitness

1 Answer

I just moved my Evo FX25 and now it makes squeaking sound when I step on and the sound get worst when it start. The sound comes from the the bottom of the motor near the belt Dear Sir: I will try to ...

Question about Image Exercise & Fitness

1 Answer

moving How to check belt motor? You can check if your motor works but putting a 35A rectifier bridge at a 110VAC power source and connect the motor. Motors are usually 180VDC. So if it moves, it's OK.

Question about Smooth Exercise & Fitness

1 Answer

treadmill incline won't go up Buttons work and I feel a little incline but it doesn't move This can be caused from several things. Please elaborate on what happens when you try. Is there any error ...

Not finding what you are looking for?
Vision Fitness 2011 Vision T9800 Hrt Treadmill Logo

9 questions posted

Ask a Question

Usually answered in minutes!

Top Vision Fitness Exercise & Fitness Experts

Andrew Taylor
Andrew Taylor

Level 3 Expert

29796 Answers

ray gallant
ray gallant

Level 3 Expert

65478 Answers

Don Eagan

Level 3 Expert

714 Answers

Are you a Vision Fitness Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...