Question about Ricoh Aficio Office Equipment & Supplies
...it is a blue connector turn off copier unplugged it and replug in turn on or bad photoconductor or bad board. If it's saying replace it then you have reach end of life for it will need to
...noise coming from right side of printer. Having trouble copying and printing Could be photoconductor gears are bad will have to replace unit or fuser unit you will have to decide which one ...
...Photoconductor unit for known working ones.there was no improvement. I get occasional pages with magenta then pages with none. Sounds like a bad clutch for the magenta unit. You can swap the clutch ...
...photoconductor units)? If so, one of the new units may be defective. Try reinstalling the old units to see if the problem goes away (after resetting the machine). If it does, you can replace the PCUs ...
Question about Ricoh Aficio Office Equipment & Supplies
...bad photoconductor unit (PCU), or problem with the transfer roller which is mouned inside the right side door. The PCU consists of 2 main sections; the development unit, with developer ang mag roll ...
Question about Ricoh Aficio Office Equipment & Supplies
...photoconductor. I just changed it a month ago. It has approximately 100 copies on it. I run into this problem with the CL2000 model as well. Are these just poorly designed printers? My users are very ...
...Photoconductor unit (PCU)...could be the density sensor, drum or developer roller not turning. Is it a new unit? Have all the seals been removed? It could be as simple as a bad connection. try ...
Question about Ricoh Aficio Office Equipment & Supplies
...is bad you will have to replace it. It is the Photoconductor(Drum / Developer) Cartridge If I could be of further assistance, let me know. If this helps or solves the issue, please rate it. Thanks, ...
...bad motor, but the most likely fix (and the easiest) is to replace the color PCUs (photoconductor units) which I believe all come as one set. Turn the machine off and unplug it from the wall, then ...
...bad ? Seems suspicious to me. Is there a way to reset the counter so this thing will go back to working until the part really needs to be changed ? Hi, the "Replace Photoconductor" message does come ...
297 questions posted
Usually answered in minutes!
267 Questions
218 Questions
178 Questions
117 Questions
137 Questions