Question about Samsung Office Equipment & Supplies
...TCP/IP> set that to Static then hit ok and go to TCP/IP Address, enter the TCP/IP address you want to use. I used 192.168.1.104. You always have to use the 192.168.1. the last three digits have to be ...
Question about Ricoh Aficio Office Equipment & Supplies
...tcp/ip port for connection, so you will still need to run it through a router, or if the PC is not on the internet, you can connect the machine directly to the ethernet port on your pc using a ...
Question about Ricoh Aficio Office Equipment & Supplies
...TCP/IP port similar to the computer ip address. EXAMPLE: if the address on the computer is 192.168.0.100 than put the address of the printer as follow 192.168.0.101 Please look at the paper sheet ...
IP/TCP port printer, which is physically attached to a linksys WRT160Nv2 wireless router. Can't print to it from any computer on the net. Click Start Run cmd enter type ping (the printer's ip address
TCP ip Clickm the new port. Click next Add your IP adress for the Copier here. Click next Next window will have Generic network card so press NEXT and then Finished Close printer ports window and then
Question about Ricoh Aficio Office Equipment & Supplies
tcp/ip port, and continue with installation. Select "share this printer". Driver is here if you need it: http://www.ricoh-usa.com/downloads/downloads.asp?tsn=Ricoh-USA&path=http://support.ricoh.com/bb
Question about Ricoh Aficio Office Equipment & Supplies
...TCP/IP settings manually. However, to utilize network printing and have internet access, you will want to get a router and connect your modem to the ethernet port of the router, then a network cable ...
Question about Ricoh Aficio Office Equipment & Supplies
...TCP/IP and write the address from the printer it's same as connecting a computer on network Step one. Open MS dos on a windows computer and type ipconfig then press enter. This should give you you ...
...tcp/ip port to the host name ensure that you have dns information set on the MFP and your pc and also gateway info on both and that should fix the issue once your reboot the pc and MFP. if this ...
tcp/ip port), enter "admin mode"...user name= "admin", password = "password"...then enter all network settings...IP, DNS, POP,SMTP, etc. then in "address book" enter your destination settings. This is
145 questions posted
Usually answered in minutes!
267 Questions
215 Questions
218 Questions
178 Questions
117 Questions