ADF, please put one original on the platen glass, close the platen cover and press the start button. Then replace the original by the 2nd one and continue the rest of the procedure and do also for the
...ADF exit interlock C1 Tray 1 jam C2 Tray 2 jam C3 Tray 3 jam C6-1, C6-2 Jams related to duplex C6-3 Registration sensor, re tray 1 C7-1, C7-2 HCF feed problems C7-3 Tray 1 feed problem C8 Paper stays ...
Question about HP Office Equipment & Supplies
...replace adf lid and gears for officejet pro l7680. scanner works with flatbed but adf loading freezes all copy, fax and scan functions ...
Question about Ricoh Aficio Office Equipment & Supplies
...Replace the ADF input tray. Figure 11: Follow the correct method to attach the ADF frame Make sure that the ADF cleanout part attachment is secure. If it is loose, push down on the two tabs until the ...
Question about Ricoh Aficio Office Equipment & Supplies
tray causing a bad copy at end of paper. This error is either a bad ADF or a bad cable that connects the ADF to the scanner. Either way it requires a replacement of the ADF. This is a known issue with
...Is Compatible With the Printer -Clean the ADF Paper Feed Roller -Reseat the Dell Printer Power Adapter -Try a Different Type of Print Media *If all else fails -Replace the Dell Printer
Question about Konica Minolta Office Equipment & Supplies
...Size detection tray procedure? That is done in service mode. Counter, details, stop 00 stop 01, ADF, original size detect MAX and MIn. Max the original guide to the back for min. guides to the
Question about Ricoh Aficio Office Equipment & Supplies
...Replace the ADF input tray. 10. Check the following to make sure that the ADF frame and parts are secure and correctly set up. o Make sure that the ADF frame is secure and attached correctly. o Make ...
Question about Dell Office Equipment & Supplies
...Replace the paper tray. 4. Press the Select button . 5. Resend your print job to print any missing pages. If the paper jam is not visible: 1. Turn off the printer. 2. Lift the printer unit. 3. Firmly ...
...replace. Thanks! Check that the hinges that are on the ADF (the bit that you can lift to reveal copy glass) are not broken, the left side hinge breaks, causing the ADF switch (also on left) to not ...
107 questions posted
Usually answered in minutes!
267 Questions
215 Questions
218 Questions
178 Questions
117 Questions