...mode hold the "SEL" button in for a few seconds until the menu appears. Scroll down to the SU-4 setting and turn it on. When using this method set the flash to manual and set the power as
...Turn on flash, wait until fully charged. Touch one end of wire(lead) to Center of flash contact and hold in place. Touch other end(lead) to side of flash. This should fire the flash, if the tube or ...
...to 1/4" Turn on flash and wait until light turn green or ready. Touch one lead to center of flash pin, touch other end to the outside(rail on the side) pin. Flash should discharges. ...
...hold the "SEL" button in for a few seconds until the menu appears. Scroll down to the SU-4 setting and turn it on. When using this method set the flash to manual and set the power as needed.
Flash causes camera to not shoot The flash turns on alright and it looks like it is working. However, when I put it on the camera, not only does the flash not work, the camera is also unable to shoot.
...turn on Try the following: 1. Ensure the batteries are indeed, charged. Sometimes even new ones are bad. 2. Ensure battery polarity is observed when loading batteries. 3. Make sure the flash ON/OFF ...
...flash won't turn on. I checked the my vivitar 283 flash won't turn on. I checked the battery. it's ok. what else should I do? Check the contacts for the battery to make sure they are clean and shiny. ...
Question about Fuji Cameras
...turn camera on, but 3 red lights flash when I shoot & nothing happens. I tried changing multiple batteries, all alkaline. No luck yet. Any ideas? The 3 flashing red lights indicate low battery power! ...
Question about Canon Cameras
...Load up Canon EOS Utility software 2. Connect camera with USB Cable to computer 3. Turn on camera 4. Click on EOS Utility 5. Click on flash setting More help send to my email. ...
298 questions posted
Usually answered in minutes!
444 Questions
436 Questions
407 Questions
362 Questions
315 Questions