...bent cf reader pins If they are only slightly bent you may be able to straighten them with a small flat screwdriver blade. If they are bent all the way down they will have to be replace - not a job ...
...bent pin in the CF connector in your camera .. that happens a lot if the CF card is put in wrong or if its poorly designed (not much lead in taper to capture pins) ... look in the card slot where you ...
bent pin when replacing cf card in rebel xti now card won't seat in properly. if camera pins are bent then CF card want sit properly you have repaire CF unit.
bent pin ... some CF cards have a nice lead in taper so it centers the pins as you plug it in .. but some have hardly any taper (no idea why they make some this way) .. if the pin is off just a little
...bent pins on your CF reader. Open the door, take out the card and look inside. Is there damage to the pins? You maybe able to fix it with pincers and a needle just align the pin or pins that are out ...
...CF error message. I was going to get it fixed then I realised that the bent pin was touching the adjacent pin. So I intentionally broke-off the damaged pin... an now it works perfectly! Many of the ...
CF pins inside your camera are bent over. This is very common. The solution is to remove the main circuit and replace the bent/broken pins. Most repair shops will charge between $150-$200 to fix this.
...CF card slot. I suspect that you may have a bent pin in there. If so, you may elect professional repair (likely more than you'd be willing to pay), or you might want to try the following. Remove ...
...CF card and it didn't work. LOOK INSIDE THE CAMERA Card SLOT AND SEE IF ALL THE PINS ARE STRAIGHT You may have bent the pins which is easy to do. If they are bent it will be a serviceman job to ...
1,519 questions posted
Usually answered in minutes!
27 Questions