Question about Canon MultiPASS Office Equipment & Supplies
...front door of printer Hold the CARTRIDGE and RESUME buttons Press POWER Release all buttons after the beeps Press CARTRIDGE once Press RESUME ++++++++++ Canon BJC-5000 1: Power off printer 2: Press ...
Question about Canon MultiPASS Office Equipment & Supplies
...back. No problems with the front side of printouts only back. Any ideas? YOU NEED TO REMOVE THE CARTRAGES AND THEN UNPLUG THE PRINTER. CLEAN THE INSIDE WITH RUBBING ALCOHOL AND SOME Q-TIPS.YOU HAVE ...
Question about Canon MultiPASS Office Equipment & Supplies
front access door Remove the Printheads Clean the Contact Points ( golden contacts ) If the Issue still persist, Disconnect the power Cord from back of printer, Press and hold the OK and CANCEL button
Question about Canon MultiPASS Office Equipment & Supplies
...front cover (Where you put the cartridge and drum unit in) Press the Back Button Display reads "Replace Drum 1. Yes 2. No" Press the number 1 The display reads "Accepted" Close the Front Cover If you ...
...back to front. Have I pressed a wrong button or is there a problem with my printer? This is usually a setting in the printer driver. Open your Printers and Faxes from the Start menu (Windows XP), ...
Question about Epson Office Equipment & Supplies
...front panel (where you change the toner) and the right you will see a blue lever/handle - pull it out towards you. Now on the right side panel of the printer you will notice a little plastic panel ...
Question about Canon MultiPASS Office Equipment & Supplies
back and one inside the paper path door in front, near the top. Then when those 2 are removed you lift up and out on the cover. The encoder is on the end of the drum shaft. You can remove it and clean
...of the ink cart from front to back. Then put them back in the printer and run an clean printhead by going to the Maintenance menu of the printer. That should help with the quality of the
Question about Canon MultiPASS Office Equipment & Supplies
...front cover. Be sure to return the sliding blue tab back to the home position next to the arrow or you will have dark streaks on your printouts. If this does not solve the problem then you will need ...
123 questions posted
Usually answered in minutes!
427 Questions
315 Questions
121 Questions
111 Questions
81 Questions