GE GTWN4250MWS 27" Top-Load Washer, 3.7 cu. ft. Capacity, EnerStar Qualified, HydroWave Wash "check" Questions

...water is on what could be the problem? E10 No cold fill detected - washing machine does not fill Check mains water pressure Check inlet hoses for kinks Check inlet filter Check water inlet valve ...

...Control Unit (CCU) and the Motor Control Unit (MCU) cannot be sent correctly. Potential Causes ? Check Wire Harness connections to the MCU, the motor, and Central Control Unit (CCU) ? Check the ...

...or spin error message of DE or OE "dE" - Lid open error Lid is open during wash cycle. Close lid. · Check wiring harness · Check lid switch · Check unbalance switch · Check circuit board "OE" - Water ...

...between the Central Control Unit (CCU) and the Motor Control Unit (MCU) cannot be sent correctly. Check for: Check Wire Harness connectors to the MCU, the motor, and Central Control Unit (CCU)

...nothing happens. And ideas? Open and close the door. The door has to be opened between wash cycles. Check the door switch/lock unit using the diagnostics listed below. If door is locked, Drain the ...

...and MODEL, but.. Kenmore HE2 front-load washer error codes F01. Main control board EEPROM error. Check/ ... F11. Motor control board failure. Check/ ... F20. Not filling. Check/ ... F21. Will not ...

...The washing machine has failed to drain the water in a reasonable time, nominally in six minutes. Check that filter is not blocked or obstructed Check drain hose is clear of any blockage or ...

...washing machine has detected an error with the door safety lock or interlock preventing operation. Check door is closed and latched correctly Check wiring Check door lock Error 2 Water drain time

...it for 10 min to see if it may possibly reset? Worth a try anyway. Error 1 Door safety lock error Check door is closed and latched correctly Check wiring Check door lock Check drum braking device