Question about LG WM Washing Machines
...washer, I can manually add another 1.5 gallons of water if I choose the permanent press cycle. I choose permanent press and press the button for extra soil so that the wash cycle lasts 10 minutes ...
...fill up with water and if it doesn't sense it has filled up with enough water after that time it will stop the washer. This is done as a safety so your washer won't flood your house. First thing to ...
...fill depending on the load size, so smaller loads give you less water, with the same amount of soap. Leaving clothes in the washer overnight, and leaving the door closed does contribute to mold and ...
Question about LG WM Washing Machines
...washer does nothing. The item to check would be your water inlet valve. Check it for continuity with a multi meter it should show Ohms or a closed circuit. To test it when water is overflowing unplug ...
Question about LG WM Washing Machines
...during the cycle is the bleach dispenced bleach? do u mean detergent? normally machines run pump/then start to fill.water will pass through drawer then they heat /wash/drain/spin then refil for rinse ...
...washer does not fill up with water. When I start my washer, the drum tumbles as usual to sense the load of clothing to wash. But once the washer completes this process, it does not fill up with water ...
...washer is leaking during the rinse cycle. I cleaned the filter and it is still leaking. What should I do? Leakage can be a few things..Check the door boot seal for any small rips, next the fill hoses ...
washer filled during rinse but still will not spin. Washer has several inches of water in bottom and will not drain. How do I correct this problem? Thank you - Bobbie The LG error code OE simply means
...washer showed the water spraying out - both during the fill and rinse portions of the cycle. It also appeared that the water filled much higher than it does in my machine. I realize it's supposed to ...
Question about LG WM Washing Machines
during a fill portion of the wash or rinse cycle, and the water inlet is restricted not allowed the full flow into the tub. If this is the case, check both ends of the hose connections for a plugged /
16 questions posted
Usually answered in minutes!
1,845 Questions
401 Questions
243 Questions
245 Questions
234 Questions