Question about Panasonic WORKiO Office Equipment & Supplies
...IP address, how to check? it uses dhcp by default. connect to network with dhcp. 1. print test or configuration page from menu. then connect through internet explorer. 2. install software from ...
...ip address. Please note: You won't be able to see or get to the network settings unless you first enter the adminstrators password. If I recall, you have to choose advanced settings in order for ...
Question about Panasonic WORKiO Office Equipment & Supplies
...IP addresses in the default range for DHCP, the Subnet Mask and Default Gateway addresses will be THE SAME. If you have another device on your network that will be assign a fixed address, you would ...
...want to set the gk420t into factory default the problem is the printer got ip address and it will reset the ip address,so tell me if the ip address is resetted how would i put it back to the ...
Question about Panasonic WORKiO Office Equipment & Supplies
...default ip address for the Konica Minolta C350 I need the default IP address for the C350. Also how do I change it in the machine? And how can I find it if it was changed? Press the Utility/Counter ...
Question about Panasonic WORKiO Office Equipment & Supplies
...default gateway: 192.168.2.1 PRINTER ip address: 192.168.2.18 subnet: 255.255.255.0 default gateway: 192.168.2.1 thank you for your time and help I guess you mean the c350 is not printing while ...
...me to assign the ip address to Switch.Or share me the default ip address of this switch no need of ip address....download driver software in hp website and install...automatically ip will be ...
...default IP address of 192.168.192.168. The easiest way to reconfigure is to connect a pc/laptop directly to the printer with the ethernet cable and set the ip address of the computer to ...
Question about Panasonic WORKiO Office Equipment & Supplies
...printout ip address but default gateway remain 0.0.0.0 Go to Admin mode, then network, TCP/IP, then enter the IP address, subnet and gateway. SET FOR STATIC IP not DHCP!!!!!!! Default admin pw ...
...DHCP server does not have a gateway programmed in the printer will default to it's own address. Change the IP setup to manual and you will be able to put in any address you want for the
102 questions posted
Usually answered in minutes!
83 Questions
57 Questions
57 Questions
48 Questions
33 Questions