KitchenAid New Professional 5.5 QT Commercial Style Wide Steel Bowl Stand Mixer 550 HD 575 Watt Motor- Empire Red "bowl adjustment work" Questions

bowl and so I can not work the dough correctly. I have added "washers" to the little hooks where the bowl sits and this is still not good. Can I adjust the bowl to sit higher? If so how? You

...bowl. Good Luck Colleen KitchenAidExperts.com I don't think the double screws work to adjust. I found a very tiny screw that the metal plate in the center of the back hits when it goes up. If you ...

...adjustment for the lift hieght of the bowl, but I found that putting a washer on the pins to either side will lift the bowl just enough so that the beater is closed to the bottom. You do not want it ...

attachments do not reach the bottom of bowl when mixing I just received a K45 mixer without a manual so I don't know much about how it works. In trying it for the first time, I found out that the ...

...work to lower the head down, adjust it down using the stir or slowest speed just untill you can hear the beater "Ding" against the bottom of the bowl, then back it off a quarter turn to adjust ...

bowl adjustment, which can come out of alignment naturally over time and with use of the machine. If the flat beater is striking the bottom of your bowl, this may cause the locking mechanism to loosen

bowl adjustment, which can come out of alignment naturally over time and with use of the machine. If the flat beater is striking the bottom of your bowl, this may cause the locking mechanism to loosen

...bowl height adjustment To adjust the K-5A, there is no little screw under the motor head. However, you can easily adjust it by tightening the 7/16 bolt that is accessible under the mixer base. Simply ...

...adjustment. Other ways to adjust? The 5 quart bowl looks like the original. It requires the larger size beaters. I tried raising the head on washers- still too low. I dont think the head has dropped ...

beater is not close enough to bowl the 1st time i used the mixer the beater was not close enough to the bowl and i have twisted the little screw as mentioned in the user guide but the batter still ...