HP LaserJet 1320 Printer "jams 1 page" Questions

...what was causing the constant jams. 1. output 2.top of cartridge 3. under cartridge. all 3 happen each jam print single page only, see where it stops. Suspect problem at output end. Check ...

...page two time-out and display a 13.01 or 13.02 error. 13.01.00 (HP 3500) 13.20.00 (HP 3700) Description A media delay jam has occurred in the registration area. Action Check for media stopped or ...

...1 Open the print cartridge door, and remove the print cartridge. 2 Grasp the middle edge of the side of the media that is most visible, and carefully pull it free from the printer. CAUTION Do not use ...

...1/3 OF THE PAGE COMES OUT LIKE A FAN. IT SEEMS TO JAM AT THE END OF THE PAGE, I'VE USED 20 AND 24 POUND PAGES, IT MAKES NO DIFFERENCE THE END OF THE PAGE COMES OUT LIKE A FOLDED FAN. HELP! I CAN USE ...

...1. First, clean your printer. Get some spray-n-wipe cleaner and a clean cloth and clean the entire inside of the printer. Also ensure your paper isn't dirty. Now print a test page. Does the symptom ...

jams, restart printer,if error 13.20 appears check some paper/paper particles jammed.. 1. Print from manual tray. A. If paper is jamming, check registration assembly, clean it,best method for cleaning

...page never made it out of the machine. As far as input check your rollers 1 in the tray and the pick up roller in the machine if you don't have alot of pages on the machine these likely OK. Next (and ...

...jams then 1-check the drum and see if there is an image on it( you can put a mark on the edge to see if it's rotating, thus eliminating the drum unit) 2-same for the reg roller 3-check for labels ar ...

...1 page, which gets 90% out of printer and then stops coming out. Printer then reports jam and won't print again until powered down and up. Need to remove top /back casing to inspect rollers & sensor. ...

...page is stopped in the fuser and the other resides on the ETB.I have replaced the pickup roller and separation pad of Tray 2. There is no problem when printing from Tray 1 you have to check the paper ...