HP LaserJet 2840 All-In-One Printer "error 3" Questions

error 3-motor rotation error 1. Turn the printer off, and then turn the printer back on. 2. Make sure that the fuser or toner cartridge does not hinder the movement of the gears in the drive train. 3.

...3 Error on an HP LaserJet 9000. Don't have the manual so don't know what it is. this is a network card error. the EIO card in slot 3 is probably faulty. Try swapping the card into slot 1 or 2. If you ...

...error will automatically be reprinted. 2. Turn the printer off and then on. 3. Reseat cables to the laser/ scanner and engine controller. 4. Replace the laser/scanner. 5. Replace the DC controller. ...

ERROR X is in your case 3 : FUSER MOTOR STARTUP ERROR. Y is in your case 0 : NO COLOR The service manual says: 1. Reconnect the connectors for the fuser motor and on the DC controller PCB. Replace any

...error after installed and tried 3 diferent toners, machie turned of each try and still having same issues, HP M4345xs mfp any idea why I'm still getting the error?? 54.(xx) error after installed ...

...error There is a problem with the printer's memory. The x value refers to the location of the problem: 0 = Internal memory 1 to 3 = DIMM slots 1, 2, or 3 Recommended Action Reseat or replace the ...

...not clear, turn the printer off and remove tray 3. Turn the printer on and verify if the error clears. HP has recently discovered that a 10.00.00 Supplies Memory Error can occur when Tray 3 is

...3 - Check the connectors that apply to theX error: 1: J3078 and J820 on theT driver PCA. 3: J3 on the low-voltage power supply, and J102 on the DC controller PCA. 5: J3079 and J3087 at the fans, ...

hp laserjet 3055 warming up then error 3 warming up then error 3 check in heater section or temperature sensor device have some problem find and replace it

...saying printer error. how do I fix it? Hello, you can try fix your problem following this steps: 1. Check connector J018 on DC Controller and connector at Fan 3. 2. Check Fan 3, replace if ...