HP PSC 2175 All-In-One InkJet Printer "self test page slow print" Questions

self test page Here are the steps to print a self test page: On the front panel of the product, press Menu (or Setup) . Press the Right Arrow until Print Reports displays, and then press Enter, Start,

Self-Test Report . The self-test page prints. Measure the time (in seconds) it takes for the test page to prints.If the test page prints in less than 60 seconds , this is normal print speed and you do

...self-test by holding the power button down with a pencil and opening and closing the top cover four times. Check the nozzle self-test pattern in the self-test print out. If one or more of the solid ...

...self-test report. I got a a "cartridge error" message. Then I removed both cartridges and cleaned them. Still getting the error message. This is caused by the failure of one of your ...

self test page will do the same long printing issue ( 15min). I also cleaned the glass ,tube and white strip based on the possible fixes with scanning at this website. I also tried copying a page with

...self test (eg press feed button while pressing power on - please consult your manual). If the test print is OK, then it's the PC or connecting cable. You could try any other PC or laptop (you would ...

...self test report which means nopthing to me.The colour bands etc seem fine except the blocks of colour over the lined grid at the end of the sequence seem to be getting feint and the grid under the ...

...self-test is 30 seconds. Load the printer with plain, white paper. Press Setup on the control panel of the printer. Press the down arrow until Print Report is selected, and then press OK . Press the ...

...self, 4 x CM2320's installed on 150 PC's. After a lot of head scratching I dug out wire shark and did some network analysing as I thought it was a network issue. Turns out it sort of was, the HP ...

...self Test Document...such as Font list that is embedded in the printer. This should only tale less than a 20 seconds. (45 pages per minute (ppm..) If it work perfectly, then the problem can be from ...