Miele Touchtronic W1213 Front Load Washer "5 lights" Questions

Ad

Question about Fisher and Paykel Washing Machines

2 Answers

...boardneeds changing. if the pump is blocked you should get three lights right to left 5, 3,and 2 on if the 3rd light the 6th light and the 8th light are flashing then yes you have a blocked

Ad

Question about AEG Washing Machines

3 Answers

AEG Lavamat E1050 End light blinks 5 times. In the middle of a program, my Lavamat machine stopped working and started to flash the End light 5 times. I turned it off, and when I try to reprogram it, ...

Ad

...lights will turn ON for 5 sec. 4. If there are any failure codes stored by the washer, the display shows them. Note: The last four errors will be displayed. 5. Press the same key to advance to the ...

Question about Washing Machines

1 Answer

...lights 5 & 8 We bought the control panel & top from an operational machine identical to ours (their shaft had seized). We replaced it on our faulty machine. Now lights 5 & 8 are permanently up. ...

Question about Frigidaire Washing Machines

3 Answers

...5-10 seconds caused the lights to come back on and flash the "LOC" code again. But holding the options and select buttons together for 5-10 seconds a second time caused the indicator lights to stop ...

Question about Miele Washing Machines

1 Answer

CONTROL LOCK LIGHT ON. CANN'T USE WASHER. GHW9150P0 FRONT LOAD WASHER WON'T OPERATE AS CONTROL LOCK LIGHT IS ON. WHAT DO I DO? pull plug wait 5 minutes then plug back in go into diagnostics close door

Question about Washing Machines

1 Answer

lights 5 and 6 dont light up will go through the wash cycle then gets to the second rinse, stops and beeps continually, lights 5 and 6 are only lights not lit up. Without a model number it is hard to ...

Question about Washing Machines

1 Answer

...lights out of 5 rapidly flash on the left (these are starting from the top - wash enhance, reduced creases, rinse hold and main load). At the same time the final spin light rapidly flashes too ( this ...

Question about Miele Washing Machines

1 Answer

5 VDC then remove the MI3 connector from the Machine Control board. IF the display lights; replace the Motor Control board. IF the display does not light; replace the Machine Control Board. 5). IF you

Zanussi FX1465W aquacycle, beeps 5 times and end light flashes My Zanussi FX1465W has stopped working. When it is turned on after a while it starts to beep 5 consecutive times and the end light ...

Not finding what you are looking for?
Miele Touchtronic W1213 Front Load Washer Logo

85 questions posted

Ask a Question

Usually answered in minutes!

Top Miele Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Paul Carew

Level 3 Expert

3808 Answers

vince

Level 3 Expert

2530 Answers

Are you a Miele Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...