Stihl Ms290 Ms310 Ms390 Air Filter & Pre-filter Parts "ms 290 start" Questions

...start my ms 390 when i got the saw it wouldn't start.It floods out when i try to start it.Can you tell me where to set the idle? I wouldn't adjust the idle. If it is flooding out then either ...

saw will start and run but chain wont turn Chain brake may still be applied. The chain brake is the front hand guard, pull it towards you to release the safety brake. Check chain tension, the chain ...

...MS 290 CHAINSAW WONT START I STARTED MY CHAINSAW AND EVERYTHING WAS FINE,IDLE WAS GOOD ,LOTS OF POWER.SHUT HER OF AND 30 MINUTES LATER WHEN I STARTED THE SAW IT GAVE OF WHITE SMOKE AND DIED WHEN I ...

how do you choke carb. for cold start The choke is built in to the master control lever on the left side. Squeeze the throttle triggerand push the master control lever all the way down. That is choke ...

i have a ms290 starts fine idles fine but after about 15 minutes of cutting wood it loses power an dawgs out somtimes kills, Hi goincrazy, check that your carb tubes are ok, and your exhaust filter is

...ms 290 wont start Try replacing the spark plug and fuel filter to start with. Need to ensure you have fuel and spark. We have a list of things to check as techs but if it has spark fuel and ...

...MS 260,MS 290,MS 310,MS 340, MS 360,MS 361,MS 390,MS 440,MS 460,MS 660 H=1turn,L=1 turn,T adjust STIHL MS 270,MS 280,H=3/4 turn,L=1 turn,T adjust cheers savumihai71 Solution 1 will get you close if ...

...MS 290, runs great, but the chain keeps tightening it's self on it's own The more I run the saw, the tighter the blade gets. That's an unusual problem, usually the opposite happens. After making sure ...

chainsaw ms290 stilh problem to start problem to start Hi, check that the master control is putting the choke on fully and check that the second click up is holding the throttle open slightly, regards

ms 290 You have to remove the entire thing, handle and all from the saw. Start with removing the top handle bar. Pull all the plastic plugs and remove those screws and the screws to the tank assembly.