Question about Proform Exercise & Fitness
...tight the motor won't move the belt even with no load. i discovered a bolt protruduing about one inch just behind the drive belt from the moto to the roller. The drive belt had gotten over the bolt ...
Question about Nordic Track Exercise & Fitness
...drive belt is slipping,remove the motor cover,be careful some models have hidden screws in recessed areas underneath if you remove the correct ones the hood comes off easily. There is a bracket that ...
Question about Nordic Track Exercise & Fitness
...tight or the drive belt needs changed. Unplug the unit remove the motor shroud inspect the drive belt if the rubber feel slick then my recommendation is to replace the drive belt. Adjusting the drive ...
...drive stops on every footstep B) Walking Belt/Motor Belt too Tight: If you have adjusted the walking belt or motor belt recently, check for this problem. When the belts start slipping, some people ...
...tension bolt located on front side of motor in ½ turn increments until drive belt loose .If belts move with drive belt loosened but do not move when it?s tight motor is seized. Replace
...tight, you will want to remove the motor hood and watch that the drive belt and motor are staying at the correct speed when the walk belt slips. The most likley cause is the front drive pully on the ...
...tight a little the drive belt, and test and replace the belt if necessary. 2) test the bearing motor and repair. 3) LUBE the deck belt and rollers bearing and replace if necessary maybe you have a ...
...fal while in operation Ther are two adjustments to check,the tightness of the walking belt(the screws at the back of the treadmill) and the tightness of the motor drive belt under the motor
Question about Nordic Track Exercise & Fitness
Drive belts are tight Belt stops when I get on it. Checked drive belt it is tight. 1) Try to loose a little the drive belt, for to avoid a higher tension.2) LUBE very well the deck belt, must shure is
...drive belt off my roger black silver treadmills and when I turn the motor pulley by hand every .75 of a turn it offers slight resistance with a scraping noise Must be rubbing on the walking platform ...
9 questions posted
Usually answered in minutes!
346 Questions
56 Questions
48 Questions
44 Questions