How can I take off the "stack copies"....slows printing process? load item to be copied on the top feeder panel and click copy, options, arrow down to stack/sort and select set. jb
Question about Canon Office Equipment & Supplies
...stack bypass, doesn't matter what sort of paper. Have been using predominantly Mondi colour copy 160 gsm on Canon irC3220. Wasting a lot of paper. Anyone have any ideas? Please Change your transfer ...
Question about Ricoh Office Equipment & Supplies
The tray on the side that sorts and stacks will not reset? The trays are separated and when you make copies the paper just jams. Plus the trays are all the way up and it is trying to use the bottom ...
Question about Toshiba Office Equipment & Supplies
...copier? good day cc90 is the top tray of your finisher (sorter) is causing the fault it is usually caused by there was something heavy put on the top tray or somebody bumped the tray. the bushes on ...
Question about Ricoh Office Equipment & Supplies
...copier To make multiple copies, put your original on the glass, press the number key for the number of copies you want, and hit the green Start button. If you have Sort, Stack, Staple, or Duplex ...
...is equipped with an output tray that will offset sort the sets then they will be staggered otherwise they will be in one stack. This machine does not collate while copying. Dah...shame on
stack is gone (about 20 sheets to go). The last 20 sheets in my printer have been sat there since I bought it about 18 months ago!!!! Also have problems clearing print queue when there is some sort of
Copier turns on and doesn't stop running. Can't print or reset. It seams stuck in warmup. This almost always means the toner cartridge is empty. This is especially true if you can hear sort of a thump
Question about Office Equipment & Supplies
...stack sort of like playing cards to separate the pages and keep the stack fairly small like 3/8 inch then do line feeds to see if the rollers are working right. All 3 Canon printers did this? If you ...
...stack. Check the printhead guide bar for proper lubrication- light oil similiar to 3 in 1 will work. Check for any printhead cabling catching on something as the printhead moves back and forth. If ...
287 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
623 Questions
406 Questions