Keurig B60 Coffee Maker "thats hard down" Questions

...hard' water. If you recently descaled the machine and are finding that the orange descaling light is still illuminated, please change the water hardness. You may modify the water hardness setting by ...

...hard reset? Try this, remove the tank, the drip tray, the bin on the side and the sliding thing above the bin. Hold down the on and steam buttons while plugging the machine into a live socket, it's ...

decalcify constantly appears on screen and water leakes from bottom of machine only when u press to make a coffee HI Decalcifying your boiler: Your boiler uses water that has dissolved minerals in it.

the handle while the Keurig is brewing. Mine doesn't seem to push down hard enough on the "make your own" kcup. It just takes a little downward pressure while the water is being forced thru the coffee

...down in the cylinder (this can be a little hard at first but it frees up as it gets clean) then clean and dry it all off. Then if you use a bit of lubricant, you can buy this but I just used frylite ...

...hard) back down. I found that resets the coffeemaker. Also when you make coffee I also noticed that you when the water is hot you have to pick up the handle again and put it back down then the two ...

...hard. I've had to empty the machine, turn it upside down and chisel it out. I recommend a scratch awl and a hammer. hammer the awl in at an angle then pry it out. If the gasket breaks make sure you ...

...down, you will see it bend to the left and thus miss the catch spout of the pitcher (and flow onto the surface, leaving the impression that one of the parts is "leaking") . I think this is caused by ...

...machine easier to open? It is so hard to open that my hands hurt even to write. Put the machine on the floor, grip the base of the base of the machine between your feet, bend down and unscrew the

...working fine but very noisy. Help Have re primed machine but still not working. Try pressing the water container down really hard.Ensure that lid is also firmly closed.This worked for me.Good