Hoover HTC243 Top Load Washer "pressure shuts 30 minutes" Questions

Ad

Question about Washing Machines

1 Answer

pressure starts plummeting down until it reaches 0 psi and shuts off. I have replaced the fuel pump, the cam shaft sensor, the crankshaft positioning sensor and the fuel filter!! Any ideas what can be

Ad

...30 minutes. Then check your inlet valve. Shut off valve, switch off machine & see if the water comes full flow. Check the filters on the machine inlet entry, they could be blocked, clean out. The ...

Ad

Question about Whirlpool Washing Machines

1 Answer

...shuts off once it reaches that setting water level. What can I do? The first thing to do is unplufg the unit from the mains power and let it stand for 30 minutes. Then plug it back in and start a ...

Question about Hoover Washing Machines

1 Answer

shuts off after about 2 minutes and flashes an F and then an H No water detected entering machine or Pressure switch trip not detected. If after 30 seconds the control does not detect water entering ...

shuts down and they are soaked. Washer will fill with water when not in use. Hello Lahoma, thank you for your post! I understand that your Frigidaire washer fills with water, will not drain completely

Question about Maytag Washing Machines

1 Answer

...shuts off for 30 minutes /then starts again- thrust bearung pulley turns with 1 finger in agitate direction but requires much more pressure in spin direction. residue coming off new belt- should ...

Question about Hoover Washing Machines

1 Answer

...30 minutes to reset, yet still has the same problem afterwards. Hi, Both of these indicate that there is a Problem with Pressure Switch.On Most of the Whirlpool Washer's ( Duet ), if you Open the top ...

Question about Maytag Washing Machines

1 Answer

...30 seconds if the control does not detect water entering the machin then the water valve will be shut off and the error code show. also: If the control has turned the water valves on and 8 minutes ...

Question about Kenmore Washing Machines

1 Answer

pressure switch trip is not detected. If after 30 seconds of filling with water and the minimum of 0.11 of water is not detected entering or the maximum fill time of 16 minutes is exceeded, the valves

Question about Kenmore Washing Machines

1 Answer

30 minute cool down and ever since then when I turn it on to start a load the agitator starts going while it is filling with water. It does the same when it is time in the cycle to rinse so things are

Not finding what you are looking for?
Hoover HTC243 Top Load Washer Logo

152 questions posted

Ask a Question

Usually answered in minutes!

Top Hoover Washing Machines Experts

peter gittos
peter gittos

Level 2 Expert

247 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Poppa Maddo
Poppa Maddo

Level 2 Expert

372 Answers

Are you a Hoover Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...