Hoover HTC243 Top Load Washer "water going pressure nothing" Questions

Ad

Question about Washing Machines

1 Answer

...water pressure switch is to open panel and pull off the hose going into the switch, have the machine on wash cycle, then blow into the line opening on water switch where the hose was connected. If it ...

Ad

Question about Whirlpool Washing Machines

1 Answer

...water level, it won't agitate, this is most likely cause. If it DOES agitate, then the fill valve is stuck. A kink in the pressure switch line or a pinhole can also cause this problem. The pressure ...

Ad

water does nothing after that pressure switch may be bad or tube to it clogged,pull tube off pressure switch and blow in it ,iyou may need to get a small length of tubing and connect it to the switch

Question about Hoover Washing Machines

3 Answers

water pressure is to high turn the tap down and wind the front feet right up. very common the water comes in to fast and splashes over the tray & down the front panel that will rust. replaced over

Question about Amana Washing Machines

1 Answer

...going through rinse cycle WASHER WILL NOT RINSE: If your washer doesn't go through the washer rinse cycle, the most likely cause is the water valve. What happens is the water valve will stop letting ...

Question about Whirlpool Washing Machines

1 Answer

...water isn't going into the machine as it's supposed to be. My pipe-tubes are all of a sudden leaking from the pressure - so I don't understand why the w/machine isn't doing water intake the way it ...

Question about Washing Machines

1 Answer

...going around, but machine won't fill with water, so nothing is happening (this just happened, so nothing else has changed, water is on etc) Check the pressure switch, aka water level switch. If this ...

Question about Washing Machines

1 Answer

...if you can shake any water out. Make sure the cables go back on the correct terminals. make sure the tub is empty when you refit the pressure switch, so no water is allowed to enter the pressure ...

water pressure, turn the water back off and remove the strainer that should be in one end of the hose. Inspect the strainer to see if it is stopped up, clean it and reinstall it. Now repeat this test.

Question about Washing Machines

1 Answer

...going to ur water inlet valve. Possibly from the panel or board. If your washer doesn't go through the washer rinse cycle, the most likely cause is the water valve. What happens is the water valve ...

Not finding what you are looking for?
Hoover HTC243 Top Load Washer Logo

152 questions posted

Ask a Question

Usually answered in minutes!

Top Hoover Washing Machines Experts

peter gittos
peter gittos

Level 2 Expert

247 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Poppa Maddo
Poppa Maddo

Level 2 Expert

372 Answers

Are you a Hoover Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...