Hoover AAA160 Front Load Washer "water pump access" Questions

Ad

Question about Maytag Washing Machines

1 Answer

...pump the water out. Replace the drain pump (part #35-6780) if the impeller is damaged. Secure the new drain pump to the base of the machine with the three screws and reinstall the drive belt and the ...

Ad

Question about Hoover Washing Machines

1 Answer

...water pump that catches stuff before it gets into the pump and causes damage? Hi, your machine will have filters in a couple of diffierent places. First, on the inlet valves, there are screens that ...

Ad

Question about Frigidaire Washing Machines

1 Answer

water pump or filter. What is the best way to access the water pump and filter to clean? thanks for any help. Looking for a step by step disassembly to access these parts. You need to lean it back and

...pump the water properly out to the drainage more than eight feet above the floor. When draining is complete, empty the machine then prop up the bottom front edge of the washer to allow easy access to ...

Question about Hoover Washing Machines

1 Answer

...pump clean-out, catching and discarding the water. When the water flow finally stops, completely remove the clean-out filter. Inspect the clean-out filter, the drain hose from the tub as well as ...

Question about Hoover Washing Machines

1 Answer

...pump clean-out, catching and discarding the water. When the water flow finally stops, completely remove the clean-out filter. Inspect the clean-out filter, the drain hose from the tub as well as ...

Question about GE Washing Machines

1 Answer

...water drained. Check the drain pump for foreign objects and debris. Check the pump impeller and make sure there?s nothing caught in it. Items as small as toothpicks or cotton swabs have been known to ...

Question about Bosch Washing Machines

2 Answers

...pump (the filtered water side) from the removal cap at the front of the machine Hi. You will probably have to remove the hose from the drum to the pump to clear the blockage. access is from the rear. ...

Question about Hoover Washing Machines

1 Answer

...water pump motor Something may be stuck in the pump impeller causing it to make a clicking or rattling noise. Disconnect power then remove the lower front access panel to access the pump filter and ...

Question about Hoover Washing Machines

1 Answer

...water going to the floor, unscrew the pump clean-out, catching and discarding the water. When the water flow finally stops, completely remove the clean-out filter. Inspect the clean-out filter, the ...

Not finding what you are looking for?
Hoover AAA160 Front Load Washer Logo

155 questions posted

Ask a Question

Usually answered in minutes!

Top Hoover Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Are you a Hoover Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...