...1600 drum not spinning? Hi My washing machine Hoover Vision 1600 drum has suddenly stopped spinning, its not moving even on a wash cycle. It does not give any error. Any advise would be gratefully ...
...drum does not turn during the spin cycle. Unplugged and reconnected all plugs and connectors and it worked for the rest of the day, but now displays the same problem. your belt in washer is going bad ...
...drum still did not turn. there was no smell of burnt motor. the fa belt is ok so either the pcb board or capacitor or the main switch has gone . which one do you think most likely many thanks Replace ...
drum casing halves. Replace all, but give a quick test run before replacing casing to ensure belt is positioned correctly. The job would have cost £115 which I think is well worth paying someone to do
...1600 aquajet not spinning Please give me a few pointers. The machine appears to be working perfectly apart from when in the spin cycle the machine pumps out fully and the drum rotates slowly one way ...
...drum does not spin. I had to turn it off at the wall to get my washing out. I have tried unplugging it but still the same problem. is it the tub that clunks?was it very noisy in the spin cycle?if so ...
...1600 Model:M6160S On all programmes washing machine fills, then does nothing for about 3 or 4 minutes. No movement of drum. Then machine empties. The display goes to 'end', and door can be opened. It ...
...drum is about to stop rotating it burst back up to full revs, not gently, but all at once, which makes the belt scream and the machine bounce!! It then spins for about 30 seconds and does it all over ...
...replace the trap and the ball (Note that the cage may have a slot in it that locates in the rubber boot, make sure it lines up, or it won't reassemble correctly). Now push the boot back onto the ...
17 questions posted
Usually answered in minutes!
116 Questions
99 Questions
66 Questions
56 Questions
46 Questions