Question about GE Washing Machines
...skip the spin cycle and go directly to the end. Try rearranging the clothes in the washer and restarting the cycle. 2. Blocked Drainage: If the washer is unable to drain water from the drum, it may ...
...to the designed settings and so the program seems to skip the cycle. The clothes come out wet because the spin cycle is not activated in the set program. Hence the program controller needs a
the spin is slow as it is trying to empty and spin at the same time,,, thus the clothes do not spin out correctly,,, when you reset the spin, you actually spin all the water out the second time around
Question about Washing Machines
...skip steps in the rinse cycle. Is this a timer issue? We've had trouble in the past with the washing machine not spinning out after rinse, or clothes still soaked with soapy water after all is said ...
...spin again to get water all out of clothes, it skips the water pump cycle going straight into spin ( I think that its spinning the water out...) can you please advise? I thought it might be the ...
Question about Whirlpool Washing Machines
spin the clothes, unless I put set it to spin. Is there a reset button, b/c I think it is an electronic issue? Thanks If it's new - check if it's under warranty. Let them solve it. Save you money. You
...skip the cycle. this causes the clothes to not drain properly and not rinse. pushing down on the control knob causes the spin to start back up. When it stops try wiggling the timer knob if you get it ...
...cropped up whereby the machine is making too much noise and skipping the spin cycle, and I have to set it on spin cylce second time to get the clothes squeezed out of water cheng or check the ...
...spin" when I try to wash clothes (no water comes out, the cycle just goes directly to "final spin" every time). I checked circuit breakers and found a separate one for the washer. Once I reset it, ...
...spin cycle, so the clothes are soaking wet when the cycle is completed. Is this a failure of the timer? Or something else? It is most likely a defective speed control or a defective timer. Pull out ...
1,828 questions posted
Usually answered in minutes!
200 Questions
88 Questions
87 Questions
45 Questions
22 Questions