Fisher and Paykel GWL11 Top Load Washer "lid lock" Questions

Ad

Question about Fisher Washing Machines

1 Answer

...lid wont lock Is the lid lock tang on lid broken. 2.9 Lid Lock The Phase 7 Washer uses the same lid lock that is used on the Phase 6 series 11 & 12 machines. The difference being is that the lid ...

Ad

Question about Fisher and Paykel Washing Machines

1 Answer

...Lid Lock Issue. For the FAV6800AW that is you machine type correct? The "LO" console error is "Lid has failed to unlock". I haven't experienced the "LO" error code to the display but this is the ...

Ad

Question about Amana Washing Machines

1 Answer

...lid lock wont quit blinking washer was not in use and lid was up. lid lock light started blinking and now washer will only fill and drain-will not wash or spin Your washer lid lock button is locked ...

...lock the lid and stay standby with out working ? power off by unplug and wait few minutes and again tried but the result is same The unit will not operate in this condition until the lid lock signals ...

Question about Fisher and Paykel Washing Machines

1 Answer

...lid lock keep flashing? changed lid lock but having the same problem. There is a right lid lock and a left lid lock which did you change? The left lid lock is a lock and the reed switch which tells ...

Question about Fisher and Paykel Washing Machines

1 Answer

...Lid Lock Open Circuit Check Harness to Lid Lock and connections at the Motor Control Module and lid lock ends. Primary Fault: Connector to the harness. Either end could be at fault. Action: Replace ...

Question about Fisher and Paykel Washing Machines

1 Answer

...lid lock, Left Lid Lock. You don?t need to replace the right just unplug. Here is what is happen. The left lid lock and right lid lock ?Lid is Locked? signaling are in parallel going back to the ...

Question about Fisher Washing Machines

1 Answer

...Lid Lock Open Circuit Check Harness to Lid Lock and connections at the Motor Control Module and lid lock ends. Primary Fault: Connector to the harness, either end could be at fault. Action: Replace ...

Question about Fisher and Paykel Washing Machines

1 Answer

...LID LOCK & IT LOOKED A SALTY CORROSIVE TEXTURE ON EACH END OF CONNECTION. ALSO THE TOP LID GROOVE THAT SLOTS INTO THE LID LOCK HAS BEEN GROUND DOWN & IS NOT CONNECTING & PUSHING DOWN TO ENGAGE LID ...

Question about Fisher and Paykel Washing Machines

2 Answers

...lid lock clicks several times when you try to start the wash cycle. The locked light never comes on and it just sits without starting. I disassembled the left locking switch and cleaned the contacts ...

Not finding what you are looking for?
Fisher and Paykel GWL11 Top Load Washer Logo

1,827 questions posted

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Archie Ferrarini
Archie Ferrarini

Level 3 Expert

869 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...