...replace the water inlet valve assembly. the valve on the cold water side is not working check the valve on the cold water side to make sure you have power going to that side of the valve if you do ...
...cold inlets of the valves. Then check the screens in the valves; if they're clogged, clean or replace them. If water doesn't enter the tub, set the temperature control to the HOT setting. If there is ...
...cold water supply source. The p/n from searspartsdirect.com is 12002242 for the valve assembly. If you need to replace try a local parts supplier to make sure your 120VAC connections are the same as ...
...to make sure? How about checking the voltage to valve? Why isn't just the cold wash temp light blinking? Thanks! Replace the inlet valve. This is a common fault easily fixed with a new
Question about Kenmore Washing Machines
...cold inlets of the valves. Then check the screens in the valves; if they're clogged, clean or replace them. If water doesn't enter the tub, set the temperature control to the HOT setting. If there is ...
Question about Fisher and Paykel Washing Machines
...replace the valve. I had the same issue. To do a quick fix, if you want to use cold water for the wash, just swap the hoses at the back of the washer (cold to hot and vice versa) and select hot water ...
...water is cold. On "Hot/Hot" Water is hot. Mixing valve bad? Recently had hot water heater replaced. Trash in line blocking valve? I would pull the lines off the back and check the inlet filter on the ...
...cold for warm water cycles. About $100 or less parts and labor to fix. Or if your inclined you can get the part yourself and replace it....not to much trouble. You can get a generic valve for $15 to ...
...screen from the valve. Clean the screen and replace it in the valve. Re-connect the water hose and turn the cold water supply on. If the screen is already clean,replace the water valve on the
1,828 questions posted
Usually answered in minutes!
200 Questions
88 Questions
87 Questions
45 Questions
22 Questions
