Question about Fisher and Paykel Washing Machines
...washer. thanks for any information The spring goes around the door seal it needs to be stretched around the small lip that holds the seal in place. The spring is where you grab it with needle nose ...
...SMALL PARTICLES OF BLACK CRAYON INSIDE THE WASHER BASKET AFTER WASHING A LOAD OF CLOTHING. THERE SHOULDN'T BE ANYTHING LIKE CRAYON IN THE MACHINE. COULD THIS BE COMING FROM A BELT OR GASKET OF SOME ...
...small load, it seems worse. The washer is only a few months old, but had to be torn apart and rebuilt because a blanket disintegrated and the parts fouled up everything. The washer is on a pedestal, ...
...WASHER ERROR SOLVED On my Maytag MHW5100DW0, we had an E3 F5 error code, and it started at the beginning of the wash cycle. THIS IS WHAT WAS WRONG There is a small torsion spring inside the door lock ...
Question about Washing Machines
...WASHER ERROR SOLVED On my Maytag MHW5100DW0, we had an E3 F5 error code, and it started at the beginning of the wash cycle. THIS IS WHAT WAS WRONG There is a small torsion spring inside the door lock ...
...washer.
Remove the front panel or back panel if the front is not removable. Depending on the model you may have to open the top shell too.
Reconnect the spring that's out, using the others as a ...
...leg with a small strip of wood (ei: a bit of ply wood) would do to stop the washer from tipping its that or if you can get the striped leg off put some steel washers over the threds to pack the leg ...
...washer is in spinning cycle it bangs side to side, even with a small even load, springs are in place but seems like it moves more then it should it is supposed to move freely but ofcourse not bang. ...
Question about Fisher and Paykel Washing Machines
...washer rubber seal in the door Hello, W/D here. Fit the seal to the door, then work the band into the groove, with the intention of placing the spring on last. Work it around and on until you get to ...
Question about Fisher and Paykel Washing Machines
...WASHER ERROR SOLVED On my Maytag MHW5100DW0, we had an E3 F5 error code, and it started at the beginning of the wash cycle. THIS IS WHAT WAS WRONG There is a small torsion spring inside the door lock ...
190 questions posted
Usually answered in minutes!
1,514 Questions
200 Questions
88 Questions
87 Questions
45 Questions