Fisher and Paykel Fisher Paykel Intuitive Eco Washer IWL15 "fault code 131" Questions

...http://www.docstoc.com/docs/25379715/Fisher-_-Paykel-Washer-Diagnostic-Fault-Codes/ A;; fault codes above. This video will help with error code 131 and 130 ...

...fault code on off off off off off on on Pride 5.5 That is fault code 131 131. (10000011) Phase 1 to 6 - Repetitive Rotor Position Sensor Error This fault is similar to fault number 130 above but ...

...Code 131 is called REPETITIVE ROTOR POSITION SENSOR ERROR..The 3 reasons this fault is appearing is 1--the wiring to the rotor sensor is faulty.--2--the rotor sensor is faulty.--3-- the motor ...

...fault code for Phase 6. See fault codes 130 and 131 for directions. 130. (10000010) Phase 1 to 6 - Single Rotor Position Sensor Error The Motor Control Module has found an error in the pattern ...

...code 131. It is approximately 11 years old not sure whether to bother with a service or just replace it? Oh and it also started leaking water after the last load! And is there anyway I can get it to ...

...to the later series. Multis are used to test the ohms between the stator windings and the pump. You see if there is a break or fault on the windings this also gives a similar fault code. Good ...

...fault codes 10000011 Hi just read your posting.The error number you have is 131.This error is called REPETITIVE ROTOR POSITION SENSOR ERROR.This means the wiring to the rotor sensor or the rotor ...

...CODE IS FOR WHAT? that is a rotor position sensor or RPS fault basically the control board cant detect how fast the motor is moving, you need a special tool called a RPS tester to test it with unless ...

...fault code is 131,RPS faulty. 130. (10000010) Phase 1 to 6 Single Rotor Position Sensor Error The Motor Controller has found an error in the pattern received from the Rotor Position Sensor. Likely ...