Fisher and Paykel Fisher Paykel Intuitive Eco Washer IWL15 "paykell fault code 37" Questions

Ad

Question about Fisher and Paykel Washing Machines

1 Answer

...fault code 37 I have the fault code 37. We cleaned out the pump and drain, and I still get the same fault code. Also smell a light burning odor. Pump Ohms to low will smell like burning enamal The ...

Ad

Question about Fisher and Paykel Washing Machines

2 Answers

...up or should you need additional information. Good luck and kind regards. Thank you for using FixYa. Hi, Fault code 37 pump fault, not draining etc. It's in need of a service call Hope this helps, ...

Ad

Question about Fisher and Paykel Washing Machines

3 Answers

Fault Code 37 Intuitive Washer - Hi having a problem with my fisher and paykel intuitive. Fault code 37. We have pulled the machine apart and when it goes to spin.. it keeps pumping the water back ...

Question about Fisher and Paykel Washing Machines

2 Answers

...fault code 37 "fault code 37, I need service" What is fault code 37 and can I take care of it? This machine calls this error number for most faults. So first let us know what stage it stops at. The ...

Question about Fisher and Paykel Washing Machines

1 Answer

Fault code 37 fault code 37. washing machine will not empty bowl.

...fault code 37 w... iw712 fisher and paykel washer has fault code 37 what does that mean 37 is drain error..There could be electronic reasons, but the most common problem is that there is a clogged ...

Question about Fisher and Paykel Washing Machines

1 Answer

...fault code eventually said Service fault 37. What does that mean? Emptied washer, tipped it on its side, detached drainage pipes underneath, and pulled out old fabric/lint/blockage with tweezers. ...

Question about Fisher and Paykel Washing Machines

1 Answer

...Fault Codes by press "Spin Speed Up" until the "Slow" and "HOLD" are on. The failure code shown as off off on off off on off on (which is 32+4+1 = 37). So I replaced a new Drain pump, the machine ...

Question about Fisher and Paykel Washing Machines

1 Answer

...CODE 37 means PUMP BLOCK ERROR.Is your machine draining any of the water out of it?Please reply with additional information on the question and I am sure I can help you rectify this fault.Looking ...

Fault code 37 To change to recirculating mode then the diverter wax solenoid must be getting power fed to it and making it swap over. Sounds like a fault on the control board and board will need to be

Not finding what you are looking for?
Washing Machines Logo

558 questions posted

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...