...control board inside in the upper portion of the unit,if it trips the breaker before you can do any functions on the machine,this is a 3phase inverter board for the 3 phase motor and the triacs do ...
Question about Maytag Neptune Washing Machines
...control board, which comes with a motor....price is around 280.00... thanks WHITES APPLIANCE REPAIR IN LITHONIA MARC--404-468-2208 I just finished replacing the motor and motor control board, however ...
...control board to pressure switch. 4.Check water valve. 5.Check inputs and outputs at machine control board. Good luck.And please do rate my answer.Thank you. The washer has tried to fill but was ...
Question about Maytag Neptune Washing Machines
Control Board. Maytag upgraded the motor and motor control board because this problem was so prevalent. Big rash of these a few years back... and insludes replacement instructions with the kit. The LR
Question about Maytag Neptune Washing Machines
...CONTROL BOARD IS PAD OR YOUR TOUCH PAD CONNECTION IS LOOSE. EITHER WAY YOU ARE OUT OF WARRANTY AND WILL BE PAYING OVER $400 TO GET THE PARTS MUCH LESS FIX IT. SORRY BUT YOU MIGHT NEED A NEW
Question about Maytag Neptune Washing Machines
...control board (the one behind the dials), and inserted a popsicle stick into the microswitch further from the wax motor, so the door thinks it is locked and it will spin. This results in the washer ...
MAH 6700 model works by time (controlled by the circuit board) and water flow from the cold water inlet valve. Check the screen on your cold water inlet. If clean, the water inlet valve may need to be
I ned the part number for the control board on a neptune washing machine model numbe mah-8700aww here ya go part # 34001494
...I pressed up with my finger and was able to get the door opened. Whew!!! Hope this helps. ; ) Sounds like the main control board is faulty, All functions for this unit go thru the control
123 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
358 Questions
175 Questions
151 Questions
