Question about Maytag Neptune Washing Machines
...code Sd or 5d during the spin cycle. Sometimes it showed uL in the rinse/spin cycle. What do they mean? sd is suds error. add only HE soap. UL is unbalanced load. watch load size and balancing
Question about Maytag Neptune Washing Machines
...something is clogging the washer pump inlet. DO, FL, LO, LR, ND, OD, SD, DF and NF. these are the error codes for maytag neptune washer! there is no np code, check and repost if needed.
...code SD/5d means LONG DRAIN. This error appears when the drain time exceeds 8 minutes and the water valves turn off. After 4 minutes the "Sd" error will be displayed, and then 4 minutes later the F21 ...
Question about Maytag Neptune Washing Machines
...Sd" code indicates that you have added too much detergent to the washing machine and your laundry has too many suds. The machine will stop displaying this code if it has successfully run the suds ...
...code. So I am thinking 5d is not the same as d5. HELP 5d is actually Sd, which means too many suds. Make sure you're using "he" types of laundry detergent. mine did the same thing it was the little ...
...SD" error - on all wash cycles within the "Rotary Selector". Sometimes the clothes do continue to tumble and may spin, however, most of the time they are still dripping wet. I can use the "Rinse & ...
Question about Maytag Neptune Washing Machines
SD message then sometimes d5 or DL I've tried lightening the load, running spin only, everything I can think of. I'd say probably 90% of the times I wash towels this washer does this. Any ideas? Check
...Sd" code indicates that you have added too much detergent to the washing machine and your laundry has too many suds. The machine will stop displaying this code if it has successfully run the suds ...
...code SD When the washing machine is halfway through its cycle it stops and a cde SD shows on the display. What can I do and what does this mean? I work for an appliance company in the service ...
...code lf my washer wont fill up and is blinking Sd this means long fill.try disconnecting water hoses on washer and inspect screens were hoses screw on ,if they look rusty or dirty clean with clr or ...
123 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
358 Questions
175 Questions
151 Questions