Maytag MGR4452BDW / MGR4452BDQ / MGR4452BDB Gas Kitchen Range "touchpad control" Questions

Ad

...Sounds like we need to replace control touchpad... Do we need to replace the complete control touchpad or membarane of touchpad that also called ERC? you need to replace the control and ...

Ad

Question about Kitchen Ranges

2 Answers

...touchpad connector fits tight into the control board. The F1 code can be cleared by pushing CANCEL/OFF. If it returns the touchpad needs to be replaced . This appears to be control failure. The F1 ...

Ad

Question about GE Kitchen Ranges

1 Answer

...the control panel to access the touchpad and electronic control. Remove the touchpad ribbon from the control inspect for and clean any corrosion and reinsert it. If this fails, replace the

Question about Kenmore Kitchen Ranges

2 Answers

control panel - remove the wiring/tape wire from touchpad to EOC...plug range back in...leave over night...if f1 code comes back it's the EOC...if the error code clears it's the touchpad...replace the

Question about GE Kitchen Ranges

1 Answer

...control (ERC) is detecting a problem with one or more key on the touchpad. This fault code can be caused by a defective touchpad or the ERC. To determine which part is bad you need a technician to ...

Question about Magic Chef Kitchen Ranges

1 Answer

...a bad connection from the touchpad to the control. Unplug the range. Open the control panel. Unplug the ribbon. Plug the range back in. If it beeps,replace the control. If not, replace the

...bad and to change it. I have seen some of these give a false error code, so I always replace both the control board and the touchpad on the ones I do. Here is a new control board as well: Control ...

Question about Kenmore Kitchen Ranges

2 Answers

...control or touchpad, pull the range away from the wall and disconnect the power to it. Remove the cover on the rear of the control panel. Remove the screws that hold the clock or control to the front ...

...work. Burners work ok. Replaced the control panel and cleaned connectors on strip leading to touchpad, but still no change. No error codes are shown. I think you must consult with the whirlpool ...

Question about Kitchen Ranges

1 Answer

...this can be resolved by making sure the touchpad connector fits tight into the control board. The F1 code can be cleared by pushing CANCEL/OFF. If it returns the touchpad needs to be replaced ...

Not finding what you are looking for?
Maytag MGR4452BDW / MGR4452BDQ / MGR4452BDB Gas Kitchen Range Logo

119 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Kitchen Ranges Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Maytag Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...