Asko W6021 Front Load Washer "pin trap" Questions

...pin trap will not screw back into the washer I unscrewed the pin trap, cleaned out all the coins, and now I can not screw the pin trap back into the washer. No matter how hard I push the pin trap it ...

Pin Trap We've had the Asko for about a year and a half and I cleaned the pin trap in the first six months. Tried to do clean #2 tonite and cannot get into the trap. The manual sez to 'Unscrew the Pin

...clasp on it? The little black hose in the pin trap compartment gets hooked onto the round pin on the door of the pin trap access, that little hose is a bypass hose from the pump inlet hope this ...

...pin trap and the trap itself you can get it out by jiggling and poking into the trap area with a narrow strip of plastic. Mostly, though it just requires a stronger grip on the door to the pin ...

pin trap We constantly have water in the pin trap that smell like rotten eggs! I have been draining it after every load (water only inside) and the smell is terrible. What could be causing this? I had

the debris. if you machine doesnt have a button trap, remove the hose going to the pump and look for bobby pin, nails, screws, etc. The worse case is you burnt out the pump and will need to replace it

...pin trap and the trap itself. I got it out by jiggling and poking into the trap area with a narrow strip of plastic. Mostly, though, it just requires a stronger grip on the door to the pin trap--the ...

finish spin I have been having off and on problems with the final heavy duty spin. At first it was the pump and we fixed the bobby pins and money that keep clogging that up. By the way for us females ...

washing machine not draining or spinning. samsung j1043. Samsung washer drain pumps usually have a trap that may be holding a large amount of debris (buttons, pins, coins, etc) and lint packs around ...

...pin trap at the drain pump; still no luck. It won't spin, but if I drain the washer manually at the drain pump/pin trap, it will spin and the door will open after spinning, but only if I manually ...