...pin trap will not screw back into the washer I unscrewed the pin trap, cleaned out all the coins, and now I can not screw the pin trap back into the washer. No matter how hard I push the pin trap it ...
...pin trap as mine will not come off either. Also how to open the door manually as I have a power blackout and need to get wahing out of machine. Thankyou, Leigh I had the same problem, thank you for ...
...pin trap--the little handle is slippery, and hard to get a good grip on. Try making a grip out of a piece of duct tape, or grabbing the handle with pliers.. Or try this alternate method you have a ...
the debris. if you machine doesnt have a button trap, remove the hose going to the pump and look for bobby pin, nails, screws, etc. The worse case is you burnt out the pump and will need to replace it
...fill up and wash. but will not pump water out of the machine. Check the button trap,it is a flap door at the bottom of the machine somewhere.It's probably full of hair pins,coins or or other
what does oe stand for on a LG washer Hello. OE on an LG washer is telling you it cannot drain. Start by opening the small panel on the bottom left of the washer and checking the drain screen/trap. If
...clasp on it? The little black hose in the pin trap compartment gets hooked onto the round pin on the door of the pin trap access, that little hose is a bypass hose from the pump inlet hope this ...
washing machine is not draining. Is there a filter or coin trap I can access to see if it full of my teeenage daughters bobby pins? You got to check the Drain Pump Check the drain hose, On many models
washing machine not draining or spinning. samsung j1043. Samsung washer drain pumps usually have a trap that may be holding a large amount of debris (buttons, pins, coins, etc) and lint packs around ...
336 questions posted
Usually answered in minutes!
62 Questions
64 Questions
50 Questions
31 Questions
40 Questions
