Question about GE Washing Machines
...high speed spin work on the lower wash cycles? From my experience, the lower wash cycles are set to only do certain things. For example: the Delicate won't do a high speed spin, even though a high ...
...wont spin fast If the motor has a twin speed check the high speed winding. If the washer has a gear box for high speed , check and see if the high speed is initiated while it is on high speed
...high speed final spin, when there is no laundry in it. When there is any laundy in the washer, it will rotate slowly one way and then the other way, but it will not go to high speed fial spin. One of ...
...high speed hi my washing machine seems to be washing ok but when it comes to a spin it spins a little bit but soon as it goes into a high speed spin it drops out of sipn then trys again over and over ...
Question about Whirlpool Washing Machines
...high speed cycles. Diagnostic tests return no error codes and run through all the cycles, including the high speed spin cycle. Diagnostic tests return no error codes and run through all the cycles, ...
high speed spin m/c takes in the detergent, washes ok, motor turns at slow speed back and forth during wash but no low or high speed rinse. It times out a light with a flashing on the front panel. The
...high speed during spin cycle leaving clothes very wet every now and then it will go to high speed. i tried turning the dial around a couple of times and it went into high speed. i can't seem to find ...
...high speed spin doesn't Kenmore mod. #417.44092500 high efficiancy front load washing machine, high speed spin doesn't work. All other aspects work fine, it agitates, drains, but it shuts off before ...
high speed; the washer does the complete cycle, and agitates in both directions and does physically spin, but it will not go into the 'high speed' spin that actually spins the water out of the clothes
...high speed it just turns off. Do you have any suggestions on what this problem may be? Motor has some shorted windings. Timer switches to higher current for faster rotation and the thermal overload ...
34 questions posted
Usually answered in minutes!
243 Questions
62 Questions
64 Questions
50 Questions
31 Questions