...wont spin, until you move the conection @ lower right of motor (one wire) is that the carbon brush? and by replacing it will this repair the sparking and ticking sound when it does spin? also are ...
...wont spin or drain Plug off the wall first. Remove the front lower panel, screws underneath. Be prepared for water, drain out from drain hose. Check filter for clogging, clean out. Sometimes when the ...
...pump by removing the lower front cover. 2 torx screws, and the screw holding the emergency door release. my asko w 620 wont start. the fuse are fine,but the light doesnt go on. what's the next ...
...Wont rotate My machine was not spinning so i cleaned out all the pipework and the tube to the waterlevel switch and it all clicks ok now i have put it back together it will not rotate at all it fills ...
Question about Whirlpool Washing Machines
...Wont Advance Even Tho The Timer Countsdown Ive Checked The Brushes And They Are Perfect Could It Be A Timer Fault Sounds like a problem with the door lock, door switch or the door switch actuator. ...
Question about General Electric Washing Machines
wont do a final empty and spin. Its not the pump and its not the brushes please help :( Hi from retired Englishman in SW France, Are you refering to the main motor when you say 'Its not the 'pump' and
...wont spin if they cant drain.so because of your standing water your pump is blocked or not working .most off the time its blocked.remove frount pannel and get to pump.see if blocked.if not wound have ...
...wont spin Dear Blaze, Here is a link for a service manual Hotpoint WMA64 Installation And User Instructions Manual The drum motor, its brushes, the belt, or idler arm roller, and the drum roller ...
...wont start machine fills with water then drains and proceeds to S.Have replaced the worn brushes but no joy still doing the same proceeds to s Washer fills with water then drains: The critical ...
...wont spin due to the water left in the pump or it could be the carbon brushes which are situated in the motor these are plastic with the carbon inside they are eld on by 2screws if these are lower ...
48 questions posted
Usually answered in minutes!
243 Questions
62 Questions
64 Questions
50 Questions
31 Questions