...pin trap will not screw back into the washer I unscrewed the pin trap, cleaned out all the coins, and now I can not screw the pin trap back into the washer. No matter how hard I push the pin trap it ...
Cleaning the Pin Trap We've had the Asko for about a year and a half and I cleaned the pin trap in the first six months. Tried to do clean #2 tonite and cannot get into the trap. The manual sez to ...
...the quick start guide no owners manual. Thanks You can get a PDF owners manual at: http://www.askousa.com/customer-care/technical_documentation/ Page 23 show the pin trap and how to clean. Good
what does oe stand for on a LG washer Hello. OE on an LG washer is telling you it cannot drain. Start by opening the small panel on the bottom left of the washer and checking the drain screen/trap. If
Question about General Washing Machines
...cleaning out the trap. It is located under the door and can be accessed be removing three screws at the base in the very front of the washer. The trap is white and screws to open. Watch out though, ...
pin trap where there was a coin and safety pin, but this has not solved the problem. The machine will spin when I turn the program knob to spin, but will not drain, even when I set the program knob to
...pin inside the hatch. 4. Unscrew the cover anti-clockwise and remove. 5. Remove any foreign objects from the trap and pump assembly. Check to see that the pump blades, right at the back, will rotate. ...
Question about Washing Machines
I get an F21 and SUD code. We have cleaned the trap connected to pump (it was clean though). Is it safe to say its the pump? F22 is a low dram code. SUD means high suds. Most likely there's junk ...
...TRAP and clean it,coz some dirt inside thas why the gate valve not closing properly due to some foreign object like hair pin,or coins.just clean it,check how,by using plies to remove and check how to ...
Question about Miele Washing Machines
...trap and noticed that the pump impeller is not rotating freely, just half a turn left or right, could that be the problem? something stuck in the impeller like a hair pin, coin, button, bra wire ...
48 questions posted
Usually answered in minutes!
243 Questions
62 Questions
64 Questions
50 Questions
31 Questions