...problem The machine keeps coming up with empty waste toner. Is there a way to turn of the waste toner check Hello sir;You have to empty waste toner container, it located at the end of the drum
...Dear you wash the waste toner bottle clearly. But error still your copier you check the waste toner bottle dection SENCER OR IS DIRTY CLEAN IT.. PLEASE VOTE ME . Thanks Best
...continuously for five or more seconds while the main motor was turning. - Check the connector of the waster toner full sensor. - Replace the waste toner full sensor. - Replace the DC controller
...check the transfer belt toner removal section is OK. Also check the gears on the left side of the waste toner box is ok and the machine gears ok not jammed. could also have a jam in the internal tube ...
copier is detected too much waste toner in cleaning blade assy. Book says: Clogging of toner inside the cleaner has been detected with reference to an abnormal rise in the cleaner thermistor. Try to:
Question about Kyocera Mita Office Equipment & Supplies
check waste toner box' It looks your waste toner box is full. Waste toner box collects toner drawn during printing. You have to remove waste toner bottle and empty it. Follow the instructions to clean
Question about Kyocera Mita Office Equipment & Supplies
...check waste toner box" ? the top of the waste toner container must be cleaned 100% from the toner because it should be a light sensor that has to pass through it , if its spoiled with toner the light ...
Question about Canon Office Equipment & Supplies
...Check if the waste toner botlle has some clear portion near the neck, (as in IRC3200) or other part of the bottle ,even the waste toner was removed but if this portion is still clouded by toner the ...
Question about Canon Office Equipment & Supplies
toner device ..and clean it ..or replace it ...after that when you put it back ..get into the maintenance menu and reset the waste ink ...and you will be ready to go ..Check the manual cause all these
Question about Canon Office Equipment & Supplies
...screw rotates, wait and see whathappens; if the screw does not rotate, replace the waste toner feedingunit. try to check the spring connected to waste tank, if doest rotate try to clean or replace ...
6 questions posted
Usually answered in minutes!
180 Questions
128 Questions
77 Questions
66 Questions
63 Questions