Whirlpool Duet GHW9150P Front Load Washer "casual cycle" Questions

...Casual cycle (rinse portion) but has also done it twice with 35 minutes left in the Normal/Casual cycle (wash portion). There is no error displayed, just the remaining time flashing on the display, ...

...cycle casual but no other cycle does ... E51 always from the beginning of the cycle Pull out your washer and look on the back for a plastic sleeve with paper in it.  Often these papers are ...

...'Normal/Casual' setting on. How do I get the 'Control Locked' Light off to select 'Control On' to start cycle? Press and hold the end of cycle button for 15 seconds this should clear it. Control ...

...casual cycle (cycle we usually use) is flashing, but I can't remember if that's what it usually does. Any suggestions? There are no fault codes in the disply, just the amount of time left for the ...

...cycle ( e.g. whitest whites, heavy duty, normal/casual ) is continuously blinking instead of a steady red light, which wont allow me to start the cycle . The control panel is not locked, does anyone ...

...ones? I am having trouble starting the washer . I set the cycle on casual and press the start button and the washer sensor showed to " Done" instead of starting. I only bought it three months

...Casual cycle the machine stops and starts beeping with this code F/H flashing on and off. Why and what can I do to fix this? Thanks The following link explains the "FH" error code in detail: ...

...Casual cycle. I followed these directions as written. The bottom of the drum filled with water, there was some clicking like when the washer is supposed to be switching between wash actions. However, ...

...CASUAL wash cycle and it started making this HORRID noise, so I ran to it and hit the "pause" button and it was giving me the F1 code. So of course, I finally got the door unlocked and pulled out the ...

...cycle. The delicate and hand washables selctions seem to work fine but when we try to select normal/casual, heavy duty or witest whites the correct times do not display. In fact, it appears that the ...