Whirlpool Duet GHW9150P Front Load Washer "loud during spin cycle" Questions

Loud Noise during spin cycle Occasionaly loud noise during spin cycle. Sounds like a metal bolt, nuts, etc. banging against the drum. drum bearings are gone,it would cost too much to repair,the drum ...

...loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary.This will solve your ...

Try looking at the solution for loud noise during spin with gray water in drain. This also sounds like the bearings on the shaft supporting the stainless steel drum, in the aft half of the outer drum

...loud or move that much. It literally moved about 6 inches during the spin cycle. My newborn actually woke up from the noise. Is this normal? Please help. It looks like the transit bolts are still in ...

...loud hammering/clacking sound During the spinning cycles my washer has something stuck in it that begins a hammering scraping noise. We don't want this to effect the motor and it is annoyingly loud. ...

During the final spin cycle, our front loading whirlpool is making a really loud noise - it sounds like a train is going through the house. It is in the basement on a concrete floor. If the washer is ...

...loud thud and now during spin cycles the machine pounds and slams yet when the machine is off the basket spins freely and without obstruction... any suggestions? could the basket have become warped? ...

...loud noise during spin is it hard to replace the bearings Thanks for choosing FixYa and welcome to the site. It is probably your spin bearing or motor drive. Since it is making noises during spin ...

loud knocking during spin cycle I just had a technician tell me that problem was caused because the main rotor bearing was bad. Apparently, it is a sealed bearing that comes apart due to the excessive