...pump cleanout look like after removing the lower front cover----the pump is right in front. follow the hoses from the bottom of the tub to the pump. have a rag ready to catch the water. unscrew it ...
does not open .. Must be something in the pump. Take the bottom panel off and open the pump cleanout. Tech sheet for trouble shooting is just behind the motor control unit(white boX) to the left there
...your drain pump for obstructions remove the lower access door and there is a pump drain cleanout that you can unscrew to do this,have an old pan there ready to catch any water that will come out ...
Question about Whirlpool duet Washing Machines
...cleanout and it was clear. I want to access/check the impeller for foreign items but need to know how to do that. Is there anything else I should be checking? pull the pump on the back theres 3 scews ...
spin unless it drains first.Remove lower front panel youll see pump cleanout cap,unscrew youll probably find coins etc.drain water by hand have wet vac ready.Hope this helps .Please rate my response :
Question about Whirlpool duet Washing Machines
...front loading washer on the front right side as you are looking at the washer Take that bottom panel off and check if you have objects in the pump cleanout As shown HERE Service manual and more ...
...an overflow condition caused by either a plugged drain pump or a bad pressure switch,if you hit pause/cancel and the drain pump continues to run then check the drain pump cleanout for foreign ...
Question about Whirlpool duet Washing Machines
...noise. "low humming noise??" soundslike the pump trying to pump, did you try removing the lower acess panel and physically cleanout the drain pump filter?? sondsas if its still trying to empty ...
...pump and the cleanout (large twist-cap). Pack towels under and around the cleanout. Turn the cap counter-clockwise and pull out. Remove any debris. If you have an additional cylindrical pre-filter, ...
Question about Whirlpool duet Washing Machines
...duet washer is making weard sounds noisey ITS POSSABLE THERE IS SOMETHING STUCK IN THE PUMP. SOME MODELS HAVE A CLEAN OUT, YOU NEED TO REMOVE THE BOTTOM PANNEL THEN UNSCREW THE CLEANOUT ...
11,378 questions posted
Usually answered in minutes!
187 Questions
64 Questions
34 Questions