...replace bearings on the front wheels of an American car with rear wheel drive. The trick is coming up with a new seal to protect the bearing from being attacked by leaking water. New bearings from a ...
...rear tub bearing i removed the rear panal, belt & pulley. i also removed the top, front panel & started removing the panel with the door. it is my assumption that you must remove the drum with the ...
...rear bearing and only way to repair is to replace the tub which has a bearing on it. Can it be repaired easily or is it a major task? How much is the replacement part? Thanks It is not a hard job to ...
Question about Whirlpool duet Washing Machines
ghw9100lw2 is that sold separate from the rear drum No. the bearing is molded in the rear drum. The rear outer tub runs around $200 and it is not an easy job. I recomend having a technician replace it
Question about Whirlpool duet Washing Machines
...sound when it is on the spin cycle. It did not make this sound when new. It is 15 months old. spin bearing going bad. u have to replace rear outer tub. spin bearing is molded into rear outer ...
...rear tub half. I found what appeared to be the problem with my machine, hair. Hair worked its way to the bearing area, slowed unseated the seal, and then acted as a conduit for water to enter the ...
Question about Whirlpool duet Washing Machines
old. The problem here is with the rear tub bearing. Unfortunately the bearing is not sold separately. So the rear half of the tub will have to be replaced. any further questions lease feel free to ask
...rear bearing, might be a broken tub support on the spin basket. In a nutshell, you may have to replace both tub shells and spin basket at a minimum. With parts and labor the repairs could cost ...
Question about Whirlpool duet Washing Machines
...rear tub half. I found what appeared to be the problem with my machine, hair. Hair worked its way to the bearing area, slowed unseated the seal, and then acted as a conduit for water to enter the ...
Question about Whirlpool duet Washing Machines
...rear bearing. the belt, pully and motor ar fine. Can I change the rear bearing or is it a new inner/outer tub complete? The rear bearing is part of the back half of the outer tub. In some cases the ...
11,378 questions posted
Usually answered in minutes!
187 Questions
64 Questions
34 Questions