...compressor can start . If you unplug , then plug back in , the high side has a lot more pressure , therefore the compressor will not start and the overload will cut the compressor off . When overload ...
...start compressor - be ready for compressor to go out soon. might work for a year. Replace the start cap/relay. See what happens. If nada check to see that current is reaching the motor windings. If ...
...compressor will not start and you will hear a clicking noise in 2-5 minute intervals. The clicking noise is the overload cutting the compressor off when it overheats from trying to start with a bad ...
...start the compressor to see if the compressor is bad or the starter is bad, you will either have to have it inspected by a refrigerator repairman or buy the start kit, i.e. overload and start relay, ...
...Compressor Start Relay/Overload or Compressor is bad. A bad compressor can cause Start Relay/Overload to go bad but the only way to know is to replace the Start Relay/Overload if you still have the ...
...start and noisy. The compressor would try to cycle on whlie making high frequency metal toggling noise for about 10 sencond then a louder click ends the rattling noise. fans work fine. It will try ...
...running or it's kicking off and on replace Start Relay/Overload but a bad compressor can make a Start Relay go bad so if you have the same Prob. after replacing Start Relay/Overload Compressor is ...
...start and then it stops.compressor is warm to the touch and I did defrost the freezer.the unit is 7 years old. Compressor is bad the clicking noise is the Start Relay/Overload is kicking on and off. ...
...compressor trying to start, and can't. It is possible one of the start components has failed. Under a cover on the side of the compressor are either 3 or 2 components. The start relay, the protective ...
Question about Freezers
...compressor start run about 30 second the trip the compressor. ans i can not see any run or start capacitor. The start relay should be on the side of the compressor and attached to the three prongs ...
199 questions posted
Usually answered in minutes!
322 Questions
143 Questions
42 Questions
37 Questions