...water backing up into soap dispenser When the wash cycle starts, the water comes in through the soap dispenser fine, but runs too slowly down the pipe that leads to the drum. The water backs up into ...
...soap. Is your water fill cycle slow? If there is not enough water supply pressure due to blockage, a trickle may not be enough to get all the soap into the tub and you'll be left with a wet clump of ...
Water and soap remains in the soap tray water and unused soap remain in the soap tray after a wash. You need to check for blockage in dispenser, remove completely and thoroughly clean every part of it
soap dispenser out and seen the water not flowing quickly down the tube. I don't know how to access that part of the washer to see if something is stuck in it. If you remove the top cover you will see
...water would be left over in my soap dispenser drawer and I would have to empty it before the next load. No problem just a few extra steps. Then all of a sudden none of the soap, fabric softner etc. ...
Question about LG WM Washing Machines
...water sitting in soap dispenser pullout drawer? Water remaining in soap dispenser. In front loading washers made by LG (some Kenmore too), water may remain filled in the soap dispenser after the wash ...
soap dispenser is often filledwith clear water. I pulled the drawer out and completely cleaned it and can't see anything wrong inside. Any ideas? Remove the dispenser drawer by pushing down on the tab
...water flowing out of the soap dispenser on my front load model wm1815cs. How can I fix it. Sounds like the dispenser is clogged with soap residue -- needs cleaning. First, try just pouring copious ...
...out thoroughly in hot water. The soap has blocked it. I hope I have been of help but please do not hesitate to ask if you have any further questions. I appreciate your vote if you appreciate my
150 questions posted
Usually answered in minutes!
1,845 Questions
401 Questions
243 Questions
245 Questions
234 Questions