Question about Kenmore Sewing Machines
put it all together Hi - unfortunately, putting the tension back together takes alot of training - not only do you have to re-install the parts correctly so the hook is in the correct position and the
Question about Brother Sewing Machines
...is there a screw missing that got pulled out when it came off? tip the machine and see if any other pieces may have fallen in or around should be quite simple to put back together -jeff please ...
thing falls down the thing by the needle, im not sure what itz called, but it keeps falling down and wen i try 2 put it together it still falls down. look for the nut in the needle holder and tight it
Question about Sewing Machines
I put it back together the foot pedal would no longer move the needle. The only thing the machine works for now is to fill a bobbin. Please help! Sounds like the motor belt is off or broken. good luck
...together and put blanket binding on with a decorative stitch. (Making a baby blanket). Thread breaks or skipping stitches. What needle and thread combination should I use? Take a look at the chart on ...
together. After threading, changing needles, etc. neither side stitches anything. I opened it again and the needle appears in time position, but when I try it with thread, it just doesn't catch. lower
...needle in again, I tried taking the bobbin area apart and putting it back together and it still keeps doing it. Help please I have had that problem to. All I had to do was adjust the tension and make ...
Question about Euro-Pro Sewing Machines
...to put it back in time. If you decide to attempt this repair, make notes or take pictures, so you have step by step minders to put it back together. Also leave the needle off until it is back in
...together. Usually it snaps the needle in half and I just replace it. This time, it jammed down inside the bobbin housing and I couldn't lift the needle up or own. I cut the needle in half with ...
...the foot, press the peddle it appears to be sewing but nothing sew together. the problem of your machine is your needle. put your needle in his right position. adjust the tension. and it is ok. ...
11 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions