Question about Zebra Z Office Equipment & Supplies
...print width setting through the front panel of the printer. Press SETUP and look for setting called MAX WIDTH. It should be set to 104MM (4") which is the width of the print head. It is set to ...
Question about Zebra Z Office Equipment & Supplies
setting and saving it permanently. Print a configuration label. Send a label to the printer. Print another configuration label. Compare the config labels and If it changed, then the driver changed it.
Question about Zebra Z Office Equipment & Supplies
The printer works but skips labels sometimes and causes some labels to be printing on two different labels instead of one. How can I fix this? make sure the printer is calibrated. It should feed 1 ...
...setting called PRINT WIDTH and make sure it's set to 104mm or close to that. If printing is only half way across the label, it's because the width is set to something less than 104mm. if the print ...
Question about Zebra Z Office Equipment & Supplies
...print. in next time the same is happening. I can't save the darkness of the printer permenantly.pls give solution for this issue Choose the software in the printer setting and find the parameters can ...
Question about Zebra Z Office Equipment & Supplies
...print width in configuration with 'permanent' does not correct the printing. When the job comes to that printer, it prints at 50MM. 2) On all 8 of my Z4Ms the setting to calibrate on power on or head ...
...setting in the software may be set to print black only. Also, the print head nozzles may be clogged. Perform a head cleaning If there are still gaps in the dot pattern, continue with another cycle. ...
setting will print the document in black and white colors, the pages may be diffrent on diffrent printers. look for black and white setting or Grayscale. picture: printing preferences, color page on a
Question about Zebra Z Office Equipment & Supplies
phote prints out faded and in black and pink only I tried printing a copy of my head stone photo. it turned out light pink all over except for all the inscriptions done on the stone. that part was ...
...SETTINGS, YOU WILL SEE A BLUE BAR ON THE RIGHT, THE STANDARD SETTING ON THAT IS 15.....BUT IF YOU HOLD THE MOUSE OVER IT, U CAN SLIDE THE SLIDER BAR LEFT OR RIGHT TO MAKE THE PRINT LIGHTER OR ...
285 questions posted
Usually answered in minutes!
211 Questions
32 Questions
32 Questions
11 Questions
6 Questions