Zebra Z4Mplus Label Printer "printing small" Questions

Font height is big in printed barcode. how can I adjust the size of the font? check if the setting FORMAT CONVERT is with some numbers, please change for NONE. This seting change the resolution from ...

printing in small font, you need a hotfix for that 2. On the printer: - You have to go into the menu of the printer and see if there is an option for the font, if there is increase the size of it - In

printing the same data over again loke it gets in a loop. Then we have to kill the print. I does not seem to hapen when we send small a mounts of text to print. I have a similar problem to below and I

...printing the same data over again loke it gets in a loop. Then we have to kill the print. I does not seem to hapen when we send small a mounts of text to print. try to reset the printer to factory ...

...printing small Why? It`s possible that you install a 300 dpi resolution print head on 200 dpi printer. or check the seting from the printer on (format conver) is "none" - ok, if say 150-300 or 150 to ...

...printing from the above model. However, just recently, a flashing green light appears on both the green and gray buttons when I turn the printer. Thus, not allowing me to print. I tried turing the ...

the print on the label is too small possible settings at label ar wrong or you ar printing at 300 dpi printer.

KNOCKED PRINTER ON CARPETED FLOOR. IT STILL PRINTS, BUT CARTRIDIGES "BUMP" ALONG MAKING NOISE AS IT PRINTS. IT APPEARS THAT HEADS NEED TO RAISED JUST A SMALL FRACTION OF AN INCH. ANY IDEAS? ...

print quality Ive had the printer for 4 years with no issues. There are no lines on the print, so I didnt suspect print head issues, however the edges of the text, especially large test that i print ...

lights flashing no paper jam I am had problem with LEX Z33. Won't print although file is getting through to the printer. (You can check this by going to settings/printer/right click on OPEN). You have